Updated Nov-2022 Official licence for 2V0-41.20 Certified by 2V0-41.20 Dumps PDF
Grab latest Amazon 2V0-41.20 Dumps as PDF Updated on 2022
NEW QUESTION 52
What are three characteristics of a transport zone? (Choose three.)
- A. defines the potential reach of transport nodes
- B. defines the scope and reachability of a Segment
- C. optional for creating a segment
- D. configured with multiple N-VDS
- E. configured with a Single N-VDS
Answer: A,B,E
NEW QUESTION 53
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center.
What is the minimum MTU size for the UPLINK profile?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 54
An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image.
Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?
- A. VMXNET2
- B. e1000
- C. VMXNET3
- D. Flexible
Answer: C
NEW QUESTION 55
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh list-interface <VM Name>
- B. virsh show <VM Name> | grep interfaceid
- C. virsh get-interface <VM Name>
- D. virsh dumpxml <VM Name> | grep interfaceid
Answer: D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 56
A security administrator needs to configure a firewall rule based on the domain name of a specific application. Which field in a distributed firewall rule does the administrator configure?
- A. Profile
- B. Source
- C. Service
- D. Policy
Answer: A
NEW QUESTION 57
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?
- A. esxcli network firewall ruleset set -r sysloq -e false
Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.2/nsxt_22_troubleshoot.pdf - B. esxcli network firewall ruleset set -r syslog -e true
- C. esxcli network firewall ruleset -e syslog
- D. esxcli network firewall ruleset set -a -e false
Answer: B
NEW QUESTION 58
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. tcpdump
- B. debug
- C. ipconfig
- D. ifconfig
Answer: D
NEW QUESTION 59
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: A,C
Explanation:
Explanation
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual
NEW QUESTION 60
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager log-level debug
- B. set service nsx-manager logging-level debug
- C. set service nsx-manager log-level debug
- D. set service manager logging-level debug
Answer: D
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html
NEW QUESTION 61
An NSX administrator has configured a KVM hypervisor as a transport node. Which kernel module on KVM implements a N-VDS?
- A. dyswitch
- B. etherswitch
- C. nsx-vswitch
- D. openvswitch
Answer: D
NEW QUESTION 62
Which network virtualization technologies can be used with an Ethernet VPN (EVPN) deployment in NSX-T Data Center? (Choose two.)
- A. Multiprotocol Label Switching (MPLS)
- B. Multiprotocol Border Gateway Protocol (MP-BGP)
- C. Open Shortest Path First (OSPF)
- D. Virtual Extensible Local Area Network (VXLAN)
- E. Virtual Routing and Forwarding (VRF)
Answer: B,D
NEW QUESTION 63
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. Failover of services
- B. traffic load balancing
- C. stateful services leveraged
- D. increased north/south bandwidth
- E. traffic predictability
Answer: B,D
NEW QUESTION 64
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. DNAT
- B. 1:1 NAT
- C. SNAT
- D. Reverse NAT
Answer: C
NEW QUESTION 65
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch <Logical-Switch-UUID>
- B. get logical-switches
- C. get logical-switch <Local-Switch-UUID> status
- D. get logical-switch status
Answer: A
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 66
Which CLI command shows syslog on NSX Manager?
- A. /var/log/sysloq/syslog.log
- B. get log-file syslog
- C. get log-file auth.log
- D. show log manager follow
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E3D-92AFB9D5E973.html
NEW QUESTION 67
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. Service interface
- B. Loopback Router Port
- C. Downlink interface
- D. VLAN Uplink
Answer: A
NEW QUESTION 68
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?
- A. Place a partner SVM on each compute cluster node.
- B. Centralize partner SVMs in a service cluster.
- C. Add partner SVMs to an edge cluster.
- D. Create a secondary vNIC on each quest VM for SVM communication.
Answer: A
Explanation:
Explanation
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster."
NEW QUESTION 69
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. get support-bundle file vcpnv.tgz
- B. vm-support
- C. esxcli system syslog config logger set --id=nsxmanager
- D. set support-bundle file vcpnv.tgz
Answer: B
NEW QUESTION 70
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Tier-0 gateways can be the Rendezvous Point.
- B. IGMP Snooping is used to populate multicast forwarding tables.
- C. Multicast routing is implemented with PIM Sparse-Mode.
- D. Multicast is supported in ESXi and KVM transport nodes.
- E. An Edge can be the Rendezvous Point.
Answer: B,C
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 71
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh start <NSX-Manager-ID>
- B. virsh start <NSX-Manager-Name>
- C. virsh poweron <nsx-manager-name>
- D. virsh poweron <nsx-manager-ID>
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 72
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Tier-0 gateways can be the Rendezvous Point.
- B. IGMP Snooping is used to populate multicast forwarding tables.
- C. Multicast routing is implemented with PIM Sparse-Mode.
- D. Multicast is supported in ESXi and KVM transport nodes.
- E. An Edge can be the Rendezvous Point.
Answer: B,C
NEW QUESTION 73
......
Latest 2V0-41.20 Exam Dumps VMware Exam from Training: https://surepass.free4dump.com/2V0-41.20-real-dump.html