[Dec 23, 2024] 301a Exam Dumps - F5 Practice Test Questions
New Real 301a Exam Dumps Questions
NEW QUESTION # 37
A BIG IP device delivers the online shopping website https://shop.example.com. Two pool members handle the traffic. An iRule directs requests with the hip parameter "environment=development" to a third pool member for a staging environment.
Which combination of profiles is needed at minimum?
- A. http, clientssl, persistence
- B. tcp, http, request logging
- C. tcp, http, clientssl
- D. tcp, clientssl, serverssl
Answer: C
NEW QUESTION # 38
Exhibit.
- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: A
NEW QUESTION # 39
Refer to the exhibit.
An LTM Specialist has multiple SNAT and virtual server objects configured as in the bigip.conf shown.
The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to 192.168.0.100:80.
Which two objects will show an increase in Local Traffic statistics connections?
- A. VS_B&SNAT_B
- B. VS_A&SNAT_B
- C. VS_ B & SNAT A
- D. VS_A & SNAT A
Answer: B
NEW QUESTION # 40
Two LTM devices must be manually configured to restrict in the same Device Group.
What is the correct order of steps to meet this requirement?
- A. Configure VLAN, Configure Config-Sync IP. Configure Self-IPs. Configure Failover type. Establish Device Trust, Create Device Group
- B. Configure VLAN, Configure Self-IPs, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group.
- C. Configure Self-IPs, Configure VLAN, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group
- D. Configure VLAN, Configure-Sync IP, Configure Failover type, Establish Device Trust, Sync Device Trust, Create type, Establish Device Sync Device Trust, Create Device Group.
Answer: B
NEW QUESTION # 41
An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)
- A. a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address
- B. a custom TCP monitor that works on port 8080
- C. a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address
- D. a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address
- E. a custom TCP monitor that works on port 9080,
- F. a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address
Answer: B,C
NEW QUESTION # 42
An LTM Specialist must reconfigure a BIG-IP system that load balances traffic to a web application. The security department has informed the LTM Specialist that the following cipher string must be used for TLS connections from BIG-IP to the web application.
NATIVE:IMDS:EXPORT:IDHE:EDH@SPEED
In which virtual server profile should the cipher string be configured?
- A. Server SSL
CB. Client SSL - B. Rewrite profile
- C. SPDY profile
Answer: A
Explanation:
Require SSL and flow F5 to server, server ssl
NEW QUESTION # 43
RADIUS authentication has been configured on the LTM device. The default remote user access requirements are as shown:
Read only access to the configuration Utility
Access to TMOS shell
Which two items need to be configured in this situation? (Choose two)
- A. Default remote user role is Manager
- B. Default remote user role is Operator
- C. In Console access is TMSH
- D. Default remote user role is Guest
- E. Console access is Read Only
- F. Console access is Advanced Shell
Answer: C
NEW QUESTION # 44
An LTM Specialist needs to configures virtual server that uses PVA or OPVA Which virtual server type should be used?
- A. Performance (HTTP)
- B. Performance (Layer 4)
- C. Stateless
- D. Standard
Answer: B
NEW QUESTION # 45
Consider the monitor configuration displayed below.
What is the status of a pool member that responds with ''200 OK''?
- A. disabled
- B. available
- C. unknown
- D. down
Answer: D
NEW QUESTION # 46
The network team introduces a new subnet 10.10.22.0/24 to the network. The route needs to be configured on the F5 device to access this network via the 30.30.30.158 gateway.
How should the LTM Specialist configure this route?
- A. Tmsh create net route 10.10.22/24 gw 30.30.30.158
- B. Tmsh modify net route 10.10.22/24 gw 30.30.30.158
- C. Tmsh add net route 10.10.22/24 gw 30.30.30.158
- D. Tmsh changey net route 10.10.22/24 gw 30.30.30.158
Answer: A
NEW QUESTION # 47
Remote office users are having performance issues with a virtual hosted on the F5 LTM. The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.
Which profile should the LTM Specialist enable to improve virtual server performance?
- A. A WAN optimized client side profile
- B. An HTTP profile for the virtual server
- C. A Stream profile for the remote user networks
- D. A FastL4 profile on the virtual server
Answer: A
Explanation:
They key word is that there are performance problem with Remote office users, no F5. The user experience can be improved through tcp optimization. The expression should be wom-tcp-wan-optimized in Protocol Profile (Client)
NEW QUESTION # 48
Four members in a server pool have similar hardware platforms. An LTM Specialist needs the load balancing method that can select the server with the fewest entries in the persistence table.
Which load balancing method should the LTM Specialist use?
- A. Observed
- B. Leas Connections
- C. Dynamic Ratio
- D. Least Sessions
Answer: D
Explanation:
Pay attention to the examination questions, the stem is to ask the session to keep the minimum entries in the table.
NEW QUESTION # 49
An LTM Specialist configures a new HTTPS virtual server that contains a valid example.com ssl certificate. The LTM Special receives an error in the browser when connecting.
What must be added to the SSL Client profile to fix this issue?
- A. An intermediate certificate
- B. A new example com certificate
- C. A public root certificate
- D. A sell-sign certificate
Answer: A
NEW QUESTION # 50
An LTM Administrator receives an email from the NOC stating that the switch connected to the backend server was shut down for maintenance. The BIG-IP device handles only UDP traffic. The BIG IP device did not fail over to a DR location when no pool members were available.
When the LTM Administrator checks the pool, it confirms that the monitor is still marking UP the pool member.
A tcpdump of the traffic shows the following output:
A list of the monitor configuration shows the following:
Which two modifications to the LTM configuration will mark this pool member down, when the switch is down? (Choose two.)
- A. enable reverse and wait for the next connection
- B. enable manuai-resume on the same monitor
- C. increase the timeout to three times the interval
- D. also assign a gatewayjcmp monitor to the pool
- E. add a reverse string to the game monitor
Answer: D,E
NEW QUESTION # 51
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
- A. The HA network latency is too high.
- B. The HA network is using multicast IP.
- C. The HA network is not configured for mirroring.
- D. The HA network is using the default routing domain.
Answer: B
Explanation:
NEW QUESTION # 52
An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?
- A. # tmsh create it pool http_pool members {10.10.10.101:80}
- B. # tmsh create pool http_pool members {10.10.10.101:80}
- C. # tmsh create pool http_pool members add {10.10.10.101:80}
- D. # tmsh create itm pool http_pool member {10.10.10.101:80}
Answer: A
Explanation:
The option should be wrong, it should ne itm instead of it, the correct command is:tmsh create itm pool http_pool members add (10.10.10.101:80}
NEW QUESTION # 53
An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.
What should be added to increase the performance of the device?
- A. an HTTP Compression profile
- B. a One Connect profile
- C. smaller key to the SSL profile
- D. a SPDY profile
Answer: B
NEW QUESTION # 54
......
Pass Your 301a Exam Easily with Accurate PDF Questions: https://surepass.free4dump.com/301a-real-dump.html