Dec-2021 Juniper JN0-1332 Actual Questions and Braindumps
JN0-1332 Dumps To Pass Juniper Exam in 24 Hours - Free4Dump
Juniper JN0-1332 Exam Topics:
| Section | Objectives |
|---|---|
| Security Automation and Management | Describe the design considerations for security management
Describe the design considerations for automating security.
|
| Security Virtualization | Describe the security design considerations for a virtualized environment
|
| Fundamental Security Concepts | Describe the various tenets of common security features
|
| Securing the Data Center | Describe the security design considerations in a data center
|
| Advanced SecurityConcepts | Describe advanced security features
|
| Securing the Enterprise WAN | Describe the security design considerations for an enterprise WAN
|
NEW QUESTION 19
You are asked to provide a security solution to secure corporate traffic across the Internet between sites. This solution must provide data integrity, confidentiality and encryption Which security feature will accomplish this task?
- A. IGRE tunnel
- B. IPsecVPN
- C. Layer 3 VPN
- D. IP-IP tunnel
Answer: B
NEW QUESTION 20
You are designing a service provider network. As part of your design you must ensure that the OSPF, BGP, and RSVP protocol communications are secured using the same authentication method. Which authentication protocol will accomplish this task?
- A. SHA-RSA
- B. HMAC-MD5
- C. simple authentication
- D. SHA-256
Answer: C
NEW QUESTION 21
You want to reduce the possibility of your data center's server becoming an unwilling participant in a DDoS attack When tvA3 features should you use on your SRX Series devices to satisfy this requirement? (Choose two.)
- A. UTMWebtaering
- B. Juniper ATP Cloud GeolP
- C. Juniper ATP Cloud CC feeds
- D. dynamic IPsec tunnels
Answer: C,D
NEW QUESTION 22
You are designing an IP camera solution for your warehouse You must block command and control servers from communicating with the cameras. In this scenario. which two products would you need to include in your design? (Choose two)
- A. Juniper ATP Cloud
- B. Security Director
- C. SRX Series device
- D. IPS
Answer: A,D
NEW QUESTION 23
Refer to the Exhibit.
You are asked to provide a proposal for security elements in the service provider network shown in the exhibit. You must provide DOoS protection for Customer A from potential upstream attackers.
Which statements correct in this scenario?
- A. You should implement DDoS protection to drop offending traffic on the customer edge device.
- B. You should implement DDoS protection to drop offending traffic on the core devices.
- C. You should implement DDoS protection to drop offending traffic on the edge devices closest to the destination of the attack.
- D. You should implement DDoS protection to drop offending traffic on the edge devices closest to the source of the attack.
Answer: B
NEW QUESTION 24
What are two characteristics of an overlay network design? (Choose two.)
- A. The physical network uses tunnels to transfer traffic
- B. The physical network contains per-tenant state.
- C. The overlay network contains per-tenant state
- D. The overlay network uses tunnels to transfer traffic.
Answer: C
NEW QUESTION 25
You arc asked to proud a design proposal to secure a service provider's network against IP spoofing As part of your design, you must ensure that only traffic sourced from the same subnet is followed on the customer-facing interfaces. Which solution will satisfy this requirement?
- A. BGP with source of origin community
- B. BGP labeled-unicast using the resolve-vpn option
- C. unicast RPF with strict mode
- D. unicast RPF with loose mode
Answer: C
NEW QUESTION 26
You arc designing a high availability firewall solution You select an off-path design instead of an mime design. What arc two reasons for this decision? (Choose two.)
- A. The off-path design uses fewer interfaces at the adjacency layer
- B. The off-path design is less complex
- C. The off-path design is more flexible
- D. The off-path design requires a proper routing configuration for selecting traffic
Answer: C
NEW QUESTION 27
You must ensure that all 10GbE interfaces have an MTU of 9192 and that an of the ge-0/0>4.0 interfaces on the SRX Series devices are in a specific zone.
Which type of a script would you use to accomplish this task?
- A. commit script
- B. op script
- C. event script
- D. REST script
Answer: B
NEW QUESTION 28
In yew network design, you must include a method to block IP addresses from certain countries that will automatically update within the SRX Series devices' security policies.
Which technology would accomplish this goal?
- A. IPS
- B. UTM
- C. GeolP
- D. dynamic DNS
Answer: D
NEW QUESTION 29
When considering data center security. which aspect represents the weakest link?
- A. firewall performance
- B. IPS signatures
- C. application software bugs
- D. people
Answer: B
NEW QUESTION 30
As part of your design to secure a service provider WAN. you are asked to design a destination-based remote triggered black hole (RTBH) solution What arc two reasons for using this design? (Choose two)
- A. You do not know the source address of DDoS packets
- B. The attack comes from a limited number of source IP addresses
- C. The attack is focused on a single IP address
- D. You want to ensure that the destination IP remains reachable
Answer: D
NEW QUESTION 31
Which type of SDN implementation docs Contrail use?
- A. Overlay SDN
- B. open SDN
- C. OpenFlow
- D. SDN using API
Answer: B
NEW QUESTION 32
Your network design requires that you ensure privacy between WAN endpoints.
Which transport technology requires an IPsec overlay to satisfy this requirement?
- A. L3VPN
- B. L2VPN
- C. internet
- D. leased line
Answer: A
NEW QUESTION 33
You are asked to segment the networks connected to an SRX Series device into distinct logical groups with different security requirements.
How would you accomplish this task?
- A. Define different NAT policies for each network segment.
- B. Define different security policies for each network segment.
- C. Define different security zones for each network segment
- D. Define different intrusion prevention policies for each network segment.
Answer: B
NEW QUESTION 34
When designing security for the service provider WAN. you are asked to implement unicast reverse path forwarding (uRPF) in this scenario. on which interfaces would you choose to implement loose mode uRPF?
- A. On interfaces that are user access interfaces
- B. On interfaces where the best forwarding path fee routes is through the receiving interface
- C. On interfaces that participate in multihomes environments
- D. On interfaces where all data originates on the same network as that of the router interface
Answer: A
NEW QUESTION 35
You must secure network access by requiring users to log in through an HTTP browser, while also allowing printers to connect to the network using MAC address validation. What will satisfy these requirements?
- A. 802. IX multiple supplicant
- B. captive portal
- C. MAC RADIUS
- D. guest VLAN
Answer: C
NEW QUESTION 36
You are asked to deploy multiple kiosk locations around the country. Their locations will change frequently and will need to access services in the corporate data center as well as other kiosk locations You need a central key location In this scenario, which solution would you deploy?
- A. Juniper Secure Connect
- B. Group VPN
- C. Mesh VPN
- D. Auto VPN
Answer: D
NEW QUESTION 37
Which two statements describe Juniper ATP Cloud? (Choose two)
- A. Juniper ATP Cloud can use a sandbox to detect threats that use evasion techniques.
- B. Juniper ATP Cloud runs mime with network traffic to Nock all traffic before reaching endpoint.
- C. Juniper ATP Cloud provides protection against zero-day threats
- D. Juniper ATP Cloud is an added app that must be instated with Security Director
Answer: A,D
NEW QUESTION 38
You are asked to design an automated vulnerability scanner that can actively check to see which ports are open and report on the findings. Which Junker Networks product would you use in this scenario7
- A. JSA
- B. Security Director
- C. Log Director
- D. Policy Enforcer
Answer: D
NEW QUESTION 39
Refer to the exhibit.
You arc designing a security solution using an SRX Series chassis duster in two separate buildings In this scenario, what are three considerations? (Choose three )
- A. The switches connecting to interface fxp: must support jumbo frames
- B. Latency on the fabric path must be under 1000 ms
- C. The switches connecting to interface fab1 must support jumbo frames
- D. Latency on the control path must be under 100 ms
- E. Both HA Inks must be on physically different switches.
Answer: A,C,D
NEW QUESTION 40
As part of your service provider WAN network design, you are asked to create a design that secures BGP communication .
In this scenario, what are two reasons you would choose BGP Generated TTL Security Mechanism (GTSM)? (Choose two.)
- A. All of your router BGP connections are point-to-multipoint.
- B. AlI of your router BGP connections are point-to-point
- C. You have an automated method of rotating MD5 hashes on each router.
- D. You do not have an easy method of rotating MD5 hashes on each router
Answer: A,D
NEW QUESTION 41
Refer the Exhibit.
You must ensure that return Web traffic is not dropped by the firewall devices What must be implemented on the link between FW A and FW B?
- A. BFO
- B. session sync
- C. asymmetric routing
- D. VRRP
Answer: D
NEW QUESTION 42
A customer wants to understand why Poky Enforcer is included as a part of your network design proposal.
In this situation, which statement is correct
- A. Policy Enforcer provides 2ero trust security to ail devices connecting to the network
- B. Policy Enforcer submits files to Juniper ATP Cloud for malware scanning
- C. Policy Enforcer can provide client security based on software installed on the client machine
- D. Policy Enforcer can collect events and news from a wide range of network devices
Answer: B
NEW QUESTION 43
Which automation language would you use to create on-box and off-box scripts for SRX Series devices?
- A. Ruby
- B. Python
- C. Pert
- D. Java
Answer: A
NEW QUESTION 44
......
Download the Latest JN0-1332 Dump - 2021 JN0-1332 Exam Question Bank: https://surepass.free4dump.com/JN0-1332-real-dump.html