2024 Realistic HPE0-S59 100% Pass Guaranteed Download Exam Q&A [Q27-Q51]

2024 Realistic HPE0-S59 100% Pass Guaranteed Download Exam Q&A

Accurate HPE0-S59 Answers 365 Days Free Updates

What is the exam cost of the HP HPE0-S59 Exam

The exam cost of the HP HPE0-S59 Exam is 200 USD.

HP HPE0-S59 exam is a certification exam focused on HPE Compute Solutions. It covers a range of topics related to server architecture, virtualization, storage, security, and management. To pass the exam, it is important to have hands-on experience with HPE Compute Solutions and to utilize study resources such as practice exams and study guides. Passing HPE0-S59 exam can lead to new career opportunities and increased job security.

NEW QUESTION # 27
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

A. For VC-FC modules, all of server facing ports must be property licensed.
B. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
C. SAS switches must be moved to second fabric and FC modules Installed in the first one.
D. For Brocade switches, a logical interconnect group must be created in HPE OneView.

Answer: C

NEW QUESTION # 28
Which statement about login redistribution is true?

A. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
B. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
C. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
D. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports

Answer: B

NEW QUESTION # 29
Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.
What must the customer do before migrating the application?

A. Edit the server profile and change server hardware type
B. Migrate the application to a Logical JBOD and connect it to the new server
C. Copy the server profile and assign the clone to the new hardware
D. Create a new server profile template and apply to the new hardware

Answer: A

NEW QUESTION # 30
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

A. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
C. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

Answer: B

NEW QUESTION # 31
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?

A. All logical interconnects configured using this logical Interconnect group will report inconsistency
B. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
C. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
D. All logical interconnects configured using this logical interconnect group will be automatically updated

Answer: B

NEW QUESTION # 32
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?

A. Virtual Distributed Switch
B. vSphere Standard license
C. Dedicated VMKernel port
D. Load balancing cluster

Answer: C

NEW QUESTION # 33
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?

A. Interconnect modules that provide SAS connectivity should be moved to the third fabric
B. Compute nodes must have a second CPU installed to access the second fabric.
C. Each compute node must have at least 768GB of memory installed
D. Each interconnect module in each fabric must be properly licensed in HPE OneView

Answer: C

NEW QUESTION # 34
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?

A. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
B. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
C. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.

Answer: A

NEW QUESTION # 35
Click the area within the iLO management interface that will allow you to access workload Advisor.

Answer:

Explanation:

NEW QUESTION # 36
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?

A. HPE ProLiant OL380 Gen 10 Plus
B. HPE ProLiant DL580 Gen10
C. HPE Synergy 480 Gen10 Plus
D. HPE Superdome Flex system

Answer: C

NEW QUESTION # 37
Which statement about an HPE Oneview support dump is true?

A. Support dump can be created if HPE Virtual Connect modules are installed in the frame
B. Preview support dump is available only when creating an appliance support dump
C. Appliance support dump by default contains a logical enclosure support dump
D. Support dump is a binary file that can be opened only in a dedicated application

Answer: D

NEW QUESTION # 38
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?

A. The customer can grow the existing logical enclosure up to 5 frames
B. The customer has to create a new logical enclosure for the additional frame
C. The additional frame cannot have 12Gb SAS connection modules installed
D. The additional frame must have HPE Virtual Connect FC modules installed

Answer: B

NEW QUESTION # 39
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

A. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
B. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
C. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
D. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server

Answer: C

NEW QUESTION # 40
Which compute node parameters are captured within server hardware type?

A. installed operating system
B. Size of the memory Installed
C. Mezzanine card configuration
D. Number of the CPUs

Answer: A

NEW QUESTION # 41
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

A. It is fully managed using HPE OneView including all connections
B. It is equipped with HPE Persistent memory by default
C. It can support a single processor only and up to 4 per chassis
D. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs

Answer: C

NEW QUESTION # 42
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?

A. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
B. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
C. HPE virtual Connect SE 32 Gb FC Module for Synergy
D. HPE Synergy 12 Gb SAS Connection Module

Answer: B

NEW QUESTION # 43
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.

A. HPE OneView Update Readiness Checker
B. HPE Composer Maintenance Console
C. HPE OneView Global Dashboard
D. HPE OneView Firmware Compliance Report

Answer: B

NEW QUESTION # 44
Match each HPE OneView network type with its definition.

Answer:

Explanation:

NEW QUESTION # 45
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?

A. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
B. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
C. Both HPE Synergy Gen10 full-height compute module plugins will require a license
D. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView

Answer: B

NEW QUESTION # 46
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.

Answer:

Explanation:

NEW QUESTION # 47
Which statement about HPE Superdome Flex 280 is true?

A. it cannot be managed using HPE OneView.
B. It can support up to two nPars with an external RMC.
C. It must be equipped with at least 768 GB of memory.
D. It supports 2 to 8 sockets in 2-socket increments.

Answer: C

NEW QUESTION # 48
Which statement about HPE OneView milestone releases is true?

A. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
C. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
D. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.

Answer: A

NEW QUESTION # 49
Match each HPE Synergy logical component with the definition.